Automatic bagging machine equipment key precautions

Automatic bagging machine, instead of manual bagging/bagging, is an active bagging equipment for printed packaging, such as: game cards, textbook books, test papers, homework books, writing books, animal and plant popular science painting books, notebook book, mobile phone cases, iPad protective covers and other self-adhesive bag packaging applications in daily necessities. The automatic bagging machine has novel structure, diverse functions, and multi-servo control can realize multi-functional fast switching, saving people and saving time and effort.


Automatic bagging machine

Equipment key notes, the knife should pay attention to: 1, to ensure that the knife edge is flat, there can be no gap, the gap will lead to the same gap in the bag cut out, it looks like cutting continuously. 2, the sharpness of the knife edge should be appropriate, the blade sharpness will affect the flatness of the side of the cut out bag, the sharper the knife edge, the cleaner the cut out of the bag edge, and the firmness of the cut out bag will also decrease accordingly, if the knife edge is too sharp, then it may not be able to form. The lower the sharpness of the knife edge, the thicker the cut bag edge will feel, too thick the bag edge will affect the appearance, too blunt knife edge will directly lead to the inability to block the coil film. Detailed decisions are made according to the requirements of the material, batch.

1, the heat cutting knife should be perpendicular to the following high temperature rubber roller, if the knife edge is skewed, it will show the phenomenon that there is one side thick and one side thin after cutting the bag into two sections.

2, when the hot cutting knife is at the Z low point, the pressure of the high temperature rubber roller, not too light, not too heavy, gently press the hot cut rubber roller can be, the pressure will cause the bag cut out of the bag edge is not flat, the pressure will be too heavy due to the elastic rebound of the high temperature rubber roller, and even damage the high temperature rubber roller.

3. The hot cutting blade should be parallel to the high temperature rubber roller below, otherwise the pressure of the two sections will be inconsistent when cutting the bag, and it will show the situation of drawing and cutting.


Adjustment of the

hot cutter bagging machine hot knife electric couple elucidate:

1, the thermocouple device: the thermocouple is K type, thread type thermocouple, the thread of the device is M6, the thermocouple device should pay attention to not use too much force to screw, because the structure of the screw is relatively fragile, simple break, when the screw is tight, the induction head of the thermocouple is necessary to stick tightly to the thermal cutter, no loosening, if there is loosening, it will directly lead to temperature accuracy.

2, thermocouple precautions: 1. Thermocouple wiring should pay attention to the coupling line in the machine action, not to conflict with other mechanical components, to be installed to the line fixing device frame, 2. The thermocouple line can not be continuously bent with the hot knife holder up and down, so that the wire in the thermocouple will be broken overnight.