Bag making machineWhat do you need to pay attention to when using? 1. Bag making machineBefore starting the machine, you must check whether there is dust and debris around it, clean it up and then operate; and enter the relevant data of bag making one by one and the required number of each tie; try to choose the color difference between the edges of the pattern left and right to adjust the photo eye sensitivity.Cutting Bag Machine 2. Bag making machineThe main motor first let up the low speed operation, then adjust the side position control, the film pair divided in the middle position; at the same time also adjust the left and right clamping rollers of the Bag Making Machine, so that the left and right film alignment, adjust the front and rear clamping rollers, so that the pattern is right.
3. During the production process, if you find that the automatic bag-making machine is running with strange noises or the temperature is too high, the quality of bag-making is sometimes good and sometimes bad, you need to adjust. Ask the quality inspector for inspection or repair, and so on after the inspection is qualified. The produced bags will be sorted out, and the bags with quality defects will be excluded and then tied up according to the regulations.Plastic Bags Machinery 4. Immediately after the production requirements on the film roll, adjust the size of the bag, install the heat sealing knife, and the initial adjustment of the slitter knife and heat sealing knife position. After everything is ready, you can turn on the power of the bag-making machine and set the temperature of the heat sealing knife according to the process requirements. 5. After the whole bag-making work is completed, you need to disconnect the bag-making machine's main power switch, and then disconnect the power switch of each part. Staff do a good job of cleaning up to maintain a neat and good state.
