(1) Preparations before starting the machine.Making Machine ① Check whether there is dust and debris around the equipment and remove them. ②Fill the film roll according to the requirements of the production notice. ③ Adjust the size of the bag according to the production notice and process documents, install the heat sealing knife, and preliminarily adjust the position of the slitting knife and the heat sealing knife. ⑤ Turn on the power and set the temperature of the heat sealing knife according to the requirements of the process document. ⑥ Input the relevant data of bag making and the required number of each bundle. ⑦Select the edge of the pattern with large color difference to adjust the sensitivity of the light eye to make it meet the requirements. (2) Power on ①Start the main motor, run at low speed, then adjust the edge position control, and divide the film into the middle position. ② Adjust the left and right pinch rollers to align the left and right films, and adjust the front and rear pinch rollers to align the pattern. ③ Adjust the heat-sealing knife to make it heat-sealed within the required range of the bag. ④ Adjust the slitting blade to the desired position, and adjust the punching position to the scissors mouth. ⑤ Preliminarily adjust the speed of the machine, take the sample bag that is flattened out once, and conduct a preliminary inspection. ⑥ During the production process, observe the bag making situation at any time and find any abnormality and adjust it immediately. (3) shutdown Turn off the main power switch, and then turn off the power switches of all parts.
